post

How to Apply Epoxy Paint to Painted Cement Floor

Epoxy paints are more durable than concrete paints and offers a level of sheen that paints can’t. Here is a guide on how to apply epoxy paint to painted cement floor.

Preparation

Preparation is key when applying floor coatings especially when you are working on surfaces that are high-traffic areas. Before you begin your project, make sure to clean the area free of any loose debris and dirt. This includes wax, grease, and mildew. Give it a clean off first with a broom or vacuum cleaner just to get rid of the bulk of the dirt and dust. Improperly cleaned surfaces will interfere with the primers adhesion. Proper preparation will ensure maximum adhesion, durability, and uniform coloration. If you are working with bare cement, you can use a cement masonry cleaner and etcher to degrease and clean the area. This will remove grease, oil, auto fluids, rust, and dirt. Generally, when dealing with concrete it pays to acid wash it first. Acid washing is generally a four parts water to one part acid. The idea of this is obviously it will clean the concrete and slightly etch into it to give you a nice surface with the paint to bond onto. Check here!

Method

Now we are ready to apply the primer. If the cement floor is already painted, you can apply a fresh coat of the aqua seal waterproof or sealer and primer to the cleaned cement floor so the epoxy floor coating will adhere with the new primer. You will want to apply with thin coats by brush roller or spray. Don’t overcoat as it may cause running or puddling. Wait for 2 hours before applying a top coat. If the humidity is high, you may need extra drying time.

The next step to finishing the cement floor with the epoxy show coat. You don’t want to apply this product in extreme heat or in direct hot sunlight. Keep in mind that the area should be unused for three days after the application to cure. Again, ensure the surface area is clean and free of loose debris. Hand steer your epoxy show coat, apply and thin multiple coats by brush roller or spray. Never over apply and allow four hours of dry time. It should stay longer for extreme humidity. Two to three coats are recommended depending on the color.

Depending on how big the area you are painting, it sometimes pays to have one person cutting in and another person rolling behind you. That way you’ll keep a wet edge and you’ll avoid getting any marks between what you have rolled and cut in. now the main difference between the first and second coat is with a second coat you’ll want to try to fill all the pinholes and you can either use your brush or even the roller on its side and just force the paint in to all those little holes in the concrete. Now the other thing about the second coat is you’ll find it’ll be a lot easier to apply. Learn more details at: https://www.wikihow.com/Do-Epoxy-Flooring

Garage Flooring

When you walk into your garage, the last thing your probably notice is your garage flooring. However, your floor is one of the most important features, almost as important as the car that sits in it.

There are several different types and colors to match. You could choose:

• Rubber flooring

• Floor tiles

• Paint or Epoxy

Your floor doesn’t have to be basic cement anymore with all these choices. Your garage is probably not the cleanest place in your home, especially when you look down. You may do work on your car, or just have tools lying around if you don’t have a shed. The garage flooring should be able to withstand oil, dirt, stains, paint, debris, salt and anything else that you can think of.

The floor is going to go through a lot of wear and tear over the years, so you do need to protect it. How you do it is a preference decided by you and the contractor you choose, but you should put down some protection on it.Garage Flooring If you put down good quality flooring, then it will last a long time, so it is better to do it once with quality material rather than putting down something that won’t stand the test of time like some of the cheap garage floorings that are being sold today.

Rubber garage flooring is a great option that not only adds value to your home but really looks sharp. It decreases the amount of dirt that is tracked into your home. It also helps to prevent debris from adhering to your tires. It is extremely easy to install; you just roll it out. Pieces can be cut without a hassle to go around a work area, or to make it fit into a tough corner. You get a custom fit by overlapping it, or jamming the edges together. Click here to read more info about cheap garage flooring.

It also adds a comfortable padded surface for walking and standing which is especially helpful if you spend a good deal of time in your garage. The noise is then diminished and it gives you some level of insulation as well. All in all, rubber garage flooring is not only going to protect your floor, but it will add an area to your home that you actually can enjoy being in.

If you think going to a more traditional garage floor is more your style, then you should consider the popular epoxy resin based paints that are available. It gives your floor a nice new look without the expense of the garage flooring tile or rubber floor. This can only be done if you don’t already have a sealer. If you do have a sealer on already, you will need to remove it before applying a new floor paint. This is the easiest way to add a new dimension to your garage while keeping the cost down.

No matter which garage flooring you choose, it is a good idea to do something with it, rather than just leave a bare cement. Besides the value that it adds to your home, it also helps you to deal with the salt in the winter months, and the oil you may spill working on your car. Both of these problems can seriously damage your garage floor, so it is best that you protect it with a quality solution.