post

Applying Epoxy Coating to Your Garage Floor

If you are wondering how to protect your concrete floor coatings and help it last for years then applying an epoxy coating on your garage floor is a great idea. The benefits of applying a coating far outweigh the negative aspects of not applying any protective coating at all. An epoxy is a long lasting protective finish that resists practically anything you throw at it including grease, oil and chemicals found in your garage.

If you want to paint your garage floor, this is how you do it:

Ventilate the garage

Major floor paints such as epoxy resin floor and surface master produce fumes when applying them. To protect yourself from these fumes, you should ensure that the garage is well ventilated. This calls for you to open the doors and windows in the garage for maximum aeration.

Clean the floor

You cannot apply paint on a dirty floor. Therefore, you should first clean it. To ensure that the floor is thoroughly clean, you should use a concrete or driveway cleaner to remove all the stains.

A good way to go about it is to spray the cleaner on the floor then wait for it to soak for a few minutes, and then scrub the stains using a brush. After scrubbing, you should rinse the floor with clean water. If there are stubborn stains on the floor, you should use a pressure washer to remove them.

Repair the cracks

If there are cracks in the epoxy resin floor, you should first repair them before you apply the paint. The good side is that there are many compounds in the market that aid in sealing the cracks. For maximum results, you should ensure that the floor is clean and dry before you apply the compound.

Etch the surface

Etching helps to open the pores on the concrete surface so that the applied paint can be absorbed. You should note that not all floors require etching.

To know whether your epoxy resin floor requires etching, you should sprinkle some water on the floor. If the water is quickly absorbed, you do not require etching; however, if water is not quickly absorbed, you should consider etching the floor.

Apply the primer

A primer is an undercoat that aids in maintaining adhesion to the substrate. The primer also aids in forming a uniform substrate. To apply the primer, you should use a long-handled paint roller. You should allow the primer a minimum of eight hours to dry before you apply the paint.

Apply the paint

You should first ensure that the paint is fully mixed before you apply it. To apply, you should use nylon brushes. You should first apply a thin even coat then wait for 24 hours then apply the second coat. You should avoid applying more than two coats as you will give the epoxy resin floor an ugly look. After applying the paint, you should wait for 24 hours before walking on the painted surface, and at least one week before driving on it.

To conclude

The most important step in applying anepoxy coating on a garage floor is the preparation itself. If the floor is not cleaned properly, then the epoxy coating on the garage floor will not stick, and you will have to re-do the job from scratch. Sweep your floor with a good stiff bristled broom; this will remove all the loose dirt, dust and gravel from the floor. Use your bleach cleaner to soak on any stains on the floor. After you have let epoxy resin floor soak in for a few minutes, use your stiff bristled brush and scrub the stains, you may have to do this a few times to get the stains off.

post

What’s Damp Proofing?

Damp proofing is the application of a material which prevents entry of the moisture within the walls, floor or roof.Damp proofing is done by a number of methods of which the most widely used are:A damp proof course

  • A damp proof membrane
  • Integral damp proofing
  • Surface coating
  • Cavity wall construction
  • Pressure grouting

A damp proof membrane

A damp proof membrane is any membrane that is applied to prevent moisture transmission into walls, ceiling or floor. Check out this site : https://www.resinfloorcoatingsuk.com/

Following materials can act as damp proof membrane

  • Flexible materials (Liquid damp proof membranes)

  1. a) Bitumen Mastic (Mastic Asphalt)
  2. b) Bitumen Felts (Sheets)
  3. c) Hot laid Bitumen

2)   Rigid materials

  1. a) Rich Concrete
  2. b) Mortar
  3. c) Bricks
  4. d) Stones or slates
  5. e) Metal Sheets

Liquid damp proof membrane:

Liquid damp proof membranes mainly consist of Bitumen. Liquid damp proof membranes are manufactured for brushing onto concrete floors and walls. It adheres to damped walls and once dried forms a barrier for the underlying moisture. It can be overlaid with carpets, resin-based products, vinyl or laminating floors.

How to apply liquid damp proof membrane:

The Liquid damp proof membrane is applied by pouring it on the surface floor and then spread it evenly with a paint brush or roller. Wait for 45 minutes, then apply a second coat. Damp floor membrane is ready, and now the floor can be laid.

Floor coatings:

Floor coating in construction is laying of a floor coat that is durable and enhances the look of a floor. Floor coating is available for every surface from homes, schools, and theatre to a garage; porches etc. floor coating is available with a variety of designs and colors.

Steps of floor coating:

  • Clean the floor to be coated
  • Scrub the floor with detergent and a scrubber
  • Wash the area with solution containing four parts water and one part acid
  • Neutralize the area with solution containing ten part water and one part ammonia
  • Fill the cracks with epoxy paste and scrap to level of floor
  • Apply primer coat with the help of roller and let it dry
  • Now, apply epoxy or urethane base coat
  • Disperse color flakes in the design you want.
  • Scrape the floor with metal scrapper
  • Apply finish coat

Benefits of Epoxy floor coating:

Epoxy floor coating in construction is the process in which resins and hardener are mixed to form a tensile plastic material to provide durability and resistance. These epoxy floor coatings are less than 2mm. Click here.

Following are the benefits of epoxy floor coating:

  • They are durable.
  • They have tensile strength
  • They require low maintenance cleaning.
  • They are resistant to chemicals
  • They are available in different aesthetic designs

Industrial floor paint:

Industrial floor paints are heavy duty floor paints designed for industry or factories floors. They are designed for harsh environments like heavy vehicles running over it or chemical spillage. These industrial floor paints must have following features:

  • To increase the resistance of floors against wear and tears.
  • Improve quality of floor
  • To improve appearance of the floor
  • To resist chemical spillage
  • To resist load applied over the floor

The ideal industrial floor paints are the epoxy resin based which could be water dispersed epoxy resin floor paints, the solvent containing epoxy floor paints or for the heaviest duty and exposure, solvent free epoxy resin floor paints.

post

Which Floor Coatings Should You Choose For Your Property?

Floor coatings are some of the most important factors to consider when it comes to finishing your property. The garage can be a difficult spot because it is heavily trafficked and that can cause a lot of wear and tear. However, when you use the right floor coatings, you can ensure it lasts until the end of time. So, which coatings should you be considering for your garage?

Liquid Damp Proof Membrane

Like Epoxy floor paint, liquid damp proof membrane is quite a popular option for thousands of people today. This is not only strong and reliable but of course damp proof which can be crucial for the garage and other important areas. You are using these areas quite a lot and that means you need a finishing which is going to provide you with enough strength and quality to last a lifetime. This is quite an impressive option to consider especially for your garage area.

Why Choose A Floor Coat?

To be honest, a coat or a floor sealer is very important for the garage because it helps to ensure the floor is finished in the correct way. The garage floor can in fact be protected with the right finishing such as epoxy floor paint. There are of course many good options to consider and this is certainly one of them. However, the way in which you finish the floor can determine its quality because if it isn’t finished in the correct manner then that can mean the floor won’t last very long and this can be important for most. You don’t want to waste a great deal of money on the garage only to find the floor needs to be replaced in a few years time. However, with the right floor coat, this can be avoided.

Which Should You Choose?

The two main options will be epoxy paint and liquid damp proof membrane – these are both good but it will come down to what you need. Now, everyone is different in terms of what they like to use and what they prefer so while you might not favor epoxy it might be the better option. You do need to think about what is best for your garage floor and what is best for your budget also. Remember, this is a long term investment because you don’t want the garage floor to get damaged within a matter of months because it really is a waste and of course, it will need to be redone once again. However, if you take the time to consider all factors like cost and what works best for your home, it shouldn’t be a difficult choice to make.

Make an Informed Decision

It would be simple to say one floor coating works better than another but the truth is every garage is different. While some will say they prefer the membrane, others will say epoxy and the truth is they both work as effectively as the other; maybe epoxy has a slight edge but both are good. This is something you have to remember when it comes to searching for floor coatings.

Find out more in our featured post here: http://www.pureintent.ca/residential-epoxy-flooring-practical-path-to-home-innovation/

How to Apply Epoxy Floor Paints

Epoxy paints are more robust, long lasting and radiant than typical concrete paints. The application of the epoxy floor paint consists of two parts primer and secondary and end up by applying a sealing coat. Following steps should be taken into account:

First step is to clean the floor. Before applying the epoxy resin paint coating the stain of oil and grease or another material should be remove. If the stain is hard to get rid of use a sandblaster. If there is an old layer of paint try to eradicate that. Use of high power grinder through the floor can make it smooth and leveled an ideal for the epoxy floor painting.

Another most important thing to analyze is moisture. It is necessary to perform a moisture test before applying the floor coatings. For this purpose take a sheet of plastic tape it to the floor in such a way that air cannot enter under the sheet. For a minimum time of twenty four hours leave the sheet as it is. Then check if there is any moister inside the sheet, if sheet is dry epoxy resin paint will adhere the floor properly. Read more at http://www.aqmd.gov/home/regulations/compliance/architectural-coatings/coating-category-definitions

Cover the surrounding by some plastic so that paint won’t splash on walls. Fully ventilate the area of the resin flooring. For this purpose open the doors and windows and also you can use an exhaust fan. Wipe the floor with stiff broom and in the end rinse the floor with plenty of water and let the floor dry completely.

Now mix the ingredients of epoxy paint and stir to get a uniform paint mixture. Add hardener to the up to the required amount and leave for thirty minutes.

How to Apply Epoxy Floor Paints

Now to apply the primer coat you require usual painting tools like a paint tray and brush. By using a minimum of 3 inch wide brush. Now evenly apply the coating across the entire surface of the floor. Working in small sections first lengthwise and then crosswise will be helpful and let you cover the floor in orderly manner and to avoid any kind of mess. Now let the floor dry for at least 24 hours.

Now to apply second layer of epoxy resin floor finisher make sure that primer layer has dried completely. Merge the hardener in the topcoat and carefully and thoroughly blend it. Leave the mixture so that chemical reaction takes place for twenty to thirty minutes. Now using the paint tools apply the second layer of epoxy finisher on the floor in evenly and uniform manner. Let this layer dry for 72 hours at least.

Once these steps are done your floor is ready to use. New Resin flooring will give the area a novel and bright look. Apply epoxy floor paint is not a difficult task yet it take consideration of many undertakings like the mixing of chemicals and the uniform spread of paint across the floor. If you will succeed in performing these jobs accurately then defiantly the result will make you happier and satisfied. Click here to read more info about epoxy floor paint.