post

Applying Epoxy Coating to Your Garage Floor

If you are wondering how to protect your concrete floor coatings and help it last for years then applying an epoxy coating on your garage floor is a great idea. The benefits of applying a coating far outweigh the negative aspects of not applying any protective coating at all. An epoxy is a long lasting protective finish that resists practically anything you throw at it including grease, oil and chemicals found in your garage.

If you want to paint your garage floor, this is how you do it:

Ventilate the garage

Major floor paints such as epoxy resin floor and surface master produce fumes when applying them. To protect yourself from these fumes, you should ensure that the garage is well ventilated. This calls for you to open the doors and windows in the garage for maximum aeration.

Clean the floor

You cannot apply paint on a dirty floor. Therefore, you should first clean it. To ensure that the floor is thoroughly clean, you should use a concrete or driveway cleaner to remove all the stains.

A good way to go about it is to spray the cleaner on the floor then wait for it to soak for a few minutes, and then scrub the stains using a brush. After scrubbing, you should rinse the floor with clean water. If there are stubborn stains on the floor, you should use a pressure washer to remove them.

Repair the cracks

If there are cracks in the epoxy resin floor, you should first repair them before you apply the paint. The good side is that there are many compounds in the market that aid in sealing the cracks. For maximum results, you should ensure that the floor is clean and dry before you apply the compound.

Etch the surface

Etching helps to open the pores on the concrete surface so that the applied paint can be absorbed. You should note that not all floors require etching.

To know whether your epoxy resin floor requires etching, you should sprinkle some water on the floor. If the water is quickly absorbed, you do not require etching; however, if water is not quickly absorbed, you should consider etching the floor.

Apply the primer

A primer is an undercoat that aids in maintaining adhesion to the substrate. The primer also aids in forming a uniform substrate. To apply the primer, you should use a long-handled paint roller. You should allow the primer a minimum of eight hours to dry before you apply the paint.

Apply the paint

You should first ensure that the paint is fully mixed before you apply it. To apply, you should use nylon brushes. You should first apply a thin even coat then wait for 24 hours then apply the second coat. You should avoid applying more than two coats as you will give the epoxy resin floor an ugly look. After applying the paint, you should wait for 24 hours before walking on the painted surface, and at least one week before driving on it.

To conclude

The most important step in applying anepoxy coating on a garage floor is the preparation itself. If the floor is not cleaned properly, then the epoxy coating on the garage floor will not stick, and you will have to re-do the job from scratch. Sweep your floor with a good stiff bristled broom; this will remove all the loose dirt, dust and gravel from the floor. Use your bleach cleaner to soak on any stains on the floor. After you have let epoxy resin floor soak in for a few minutes, use your stiff bristled brush and scrub the stains, you may have to do this a few times to get the stains off.

post

Which Floor Coatings Should You Choose For Your Property?

Floor coatings are some of the most important factors to consider when it comes to finishing your property. The garage can be a difficult spot because it is heavily trafficked and that can cause a lot of wear and tear. However, when you use the right floor coatings, you can ensure it lasts until the end of time. So, which coatings should you be considering for your garage?

Liquid Damp Proof Membrane

Like Epoxy floor paint, liquid damp proof membrane is quite a popular option for thousands of people today. This is not only strong and reliable but of course damp proof which can be crucial for the garage and other important areas. You are using these areas quite a lot and that means you need a finishing which is going to provide you with enough strength and quality to last a lifetime. This is quite an impressive option to consider especially for your garage area.

Why Choose A Floor Coat?

To be honest, a coat or a floor sealer is very important for the garage because it helps to ensure the floor is finished in the correct way. The garage floor can in fact be protected with the right finishing such as epoxy floor paint. There are of course many good options to consider and this is certainly one of them. However, the way in which you finish the floor can determine its quality because if it isn’t finished in the correct manner then that can mean the floor won’t last very long and this can be important for most. You don’t want to waste a great deal of money on the garage only to find the floor needs to be replaced in a few years time. However, with the right floor coat, this can be avoided.

Which Should You Choose?

The two main options will be epoxy paint and liquid damp proof membrane – these are both good but it will come down to what you need. Now, everyone is different in terms of what they like to use and what they prefer so while you might not favor epoxy it might be the better option. You do need to think about what is best for your garage floor and what is best for your budget also. Remember, this is a long term investment because you don’t want the garage floor to get damaged within a matter of months because it really is a waste and of course, it will need to be redone once again. However, if you take the time to consider all factors like cost and what works best for your home, it shouldn’t be a difficult choice to make.

Make an Informed Decision

It would be simple to say one floor coating works better than another but the truth is every garage is different. While some will say they prefer the membrane, others will say epoxy and the truth is they both work as effectively as the other; maybe epoxy has a slight edge but both are good. This is something you have to remember when it comes to searching for floor coatings.

Find out more in our featured post here: http://www.pureintent.ca/residential-epoxy-flooring-practical-path-to-home-innovation/

How to Apply Epoxy Floor Paints

Epoxy paints are more robust, long lasting and radiant than typical concrete paints. The application of the epoxy floor paint consists of two parts primer and secondary and end up by applying a sealing coat. Following steps should be taken into account:

First step is to clean the floor. Before applying the epoxy resin paint coating the stain of oil and grease or another material should be remove. If the stain is hard to get rid of use a sandblaster. If there is an old layer of paint try to eradicate that. Use of high power grinder through the floor can make it smooth and leveled an ideal for the epoxy floor painting.

Another most important thing to analyze is moisture. It is necessary to perform a moisture test before applying the floor coatings. For this purpose take a sheet of plastic tape it to the floor in such a way that air cannot enter under the sheet. For a minimum time of twenty four hours leave the sheet as it is. Then check if there is any moister inside the sheet, if sheet is dry epoxy resin paint will adhere the floor properly. Read more at http://www.aqmd.gov/home/regulations/compliance/architectural-coatings/coating-category-definitions

Cover the surrounding by some plastic so that paint won’t splash on walls. Fully ventilate the area of the resin flooring. For this purpose open the doors and windows and also you can use an exhaust fan. Wipe the floor with stiff broom and in the end rinse the floor with plenty of water and let the floor dry completely.

Now mix the ingredients of epoxy paint and stir to get a uniform paint mixture. Add hardener to the up to the required amount and leave for thirty minutes.

How to Apply Epoxy Floor Paints

Now to apply the primer coat you require usual painting tools like a paint tray and brush. By using a minimum of 3 inch wide brush. Now evenly apply the coating across the entire surface of the floor. Working in small sections first lengthwise and then crosswise will be helpful and let you cover the floor in orderly manner and to avoid any kind of mess. Now let the floor dry for at least 24 hours.

Now to apply second layer of epoxy resin floor finisher make sure that primer layer has dried completely. Merge the hardener in the topcoat and carefully and thoroughly blend it. Leave the mixture so that chemical reaction takes place for twenty to thirty minutes. Now using the paint tools apply the second layer of epoxy finisher on the floor in evenly and uniform manner. Let this layer dry for 72 hours at least.

Once these steps are done your floor is ready to use. New Resin flooring will give the area a novel and bright look. Apply epoxy floor paint is not a difficult task yet it take consideration of many undertakings like the mixing of chemicals and the uniform spread of paint across the floor. If you will succeed in performing these jobs accurately then defiantly the result will make you happier and satisfied. Click here to read more info about epoxy floor paint.

How to Apply An Epoxy Floor Coating To Your Garage Floor

Learn to apply epoxy floor paint is not hard for your garage floor coating. It is an old yet very efficient way to give your damaged and wrecked floor a new and brighten look.

Weather Analysis

First of all you have to analyze the weather and floor before you start this work. You need to test to figure out whether sogginess is coming up from the ground through the concrete. If the dampness is apparent, your floor isn’t appropriate for epoxy at this time.

Uproot old Paint

Furthermore, in case you’re managing a formerly painted floor, the best suggestion is to uproot the paint, particularly when you’re trying to apply a soluble based epoxy that could mollify the remaining fragments. Also it is essential to clean any grease or oil stains from the floor and specially consider the areas which were in contact with tire dressing because these area will repel the water and will not let to adhere the proxy properly. Click here to read more info about old paint.

Etching

Now if you want to protect your walls from the stains of epoxy floor paints just cover them with old piece of newspaper or and old plastic cloth. Next step is to etch the floor with acid solution.

Acid carving the garage floor is actually the main feasible option when preparing concrete effectively to adhere a covering. It isn’t difficult to do, however certain safety measures and steps should be taken to protect an effective and safe result. Possibly it is going to be perilous if not done effectively; How to Apply An Epoxy Floor Coating To Your Garage Floorit can bring about genuine substantial damage to body as well while damaging your floor. So please set aside an ideal opportunity to figure out how to corrosive engraving your garage floor or cement securely before heading into your garage floor coating project.

Hydrochloric acid also known as muriatic acid is a typical and good choice for etching. It is a cheap and effective chemical for etching the concrete floors. After applying the acid solution with the broom or brush, scrub the concrete gently so that the surface of the floor remains uniform. You must know that acid doesn’t work at cool temperatures so ensure the temperature of the working environment is not below 50 degrees.

Floor coating

After etching let the concrete dry completely for two or three days before applying epoxy floor paint. If there is any kind of dampness or stubborn oil stains you may want to consider applying a primer such as a liquid damp proof membrane or an oil contamination barrier. Both of these provide a layer of protection between the contentious surface and the new paint layer and will prolong the life of the epoxy paint. The final step is to choose the type of epoxy for your garage floor coating.

Epoxy floor paints are hard resins consist of two separate parts that you need to mix before the application. Commonly there are two types: solvent based and water based epoxy. For Garage floor coating water based is an optimal choice. Mix your epoxy by following the direction of manufacturer and stir for the required time before applying. Now steadily apply the first coat to the floor with the use of a handy garage floor painting kit. Let the coating dry completely. Now apply the second coat which will be your color coat for your epoxy resin floor and give a minimum 72 hours to dry. Here is your new and exquisite garage floor.

A Guide to Epoxy Floor Paint Systems

In the last three decades using epoxy floor paints to protect the concrete floors has become an essential and urbane process. The fundamental reason, obviously, is to protect the slabs from corrosion, crumbling or pollution, or to give some included advantage, for example, uniformity, non-slip, concoction resistance, simplicity of support, physical execution, and a horde of different properties. Paying little heed to the sort of building, whether it be mechanical or business, we must recollect that no other surface in a building takes more manhandle than floors.

Deciding the type of material to be used

Concrete floors are permeable and have a tendency to make dust from wear and mishandle. They are likewise subject to scraped area and concoction assault. It’s therefore that everything solid needs some kind of assurance paying little respect to where it’s found. The issue, in the general picture, is to figure out what kind of defensive material to decide for the different conditions. Aggregate floor assurance ought to be a piece of any study or assessment for new or old concrete floor insurance.

Select Floor Coating

The exhaustive procedure for selecting a covering or fixing framework, the written work of a point by point particular, and the arrangement of comprehensive application methodology and last acknowledgment criteria will give the proprietor a premise for picking the right framework. There is an extremely finish determination procedure to limit the quest for the right item and application for floor coatings. Recall that, you must choose the material, as well as an aggregate framework as far as application and aggregate thickness.

A Guide to Epoxy Floor Paint Systems

Diverse business endeavors need Industrial floor paint that is intense and impenetrable to hurt from high temperature, substance spills, or other grime, for instance, salt or oil. Standard ground surface materials are ordinarily not up to the task of giving a compelling finishing. The usage of tiles, for example, is not useful for floors that are depended upon to get significant development.

Epoxy resin floors

Coatings subordinate upon epoxy gums are probably the strong resin floor coating accessible easily. A substitute benefit is the relative forthrightness with which epoxy resin floors could be cleaned. It is not troublesome to find an epoxy paint structure for a given floor. These pitches could be found at most home change centers. Securing the right kind of covering is vital. For example, various paints planned for bond floors don’t hold epoxy and thus won’t guarantee a story properly. Read more at http://www.coatingspromag.com/articles/concrete-coatings/2013/09/paper-mill-makeover-epoxy-coatings-for-clarifier

Precautionary measures

Although the way that epoxy floors paint may look incredible on the patio, it will quickly wear off of the floor in a carport or sustenance prep range. It is a fundamental matter to apply epoxy floor paint. It is on a very basic level the same to painting, yet a couple security measures must be taken. The covering is planned to harden quickly once associated and exposed to air. This infers simply little aggregates should be mixed and used to apply or else it will harden and get unusable. Honest to goodness ventilation is critical as with any kind of paint thing. The fumes could provoke jumbling and disorder all through procurement. These crucial wellbeing measures aside, epoxy floor paint will save time and money over the long haul and will moreover make the work zone considerably more secure.